Show simple item record

dc.contributor.authorDavid V. Hutton
dc.date.accessioned2017-05-08T22:07:32Z
dc.date.available2017-05-08T22:07:32Z
dc.date.copyrightAugust 1993
dc.date.issued1993
dc.identifier.other29991888.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/71832
dc.description.abstractThe effects of cable‐tension control on guideway deflection of a planar, cable‐stayed support structure for moving vehicles is examined. The structure studied is referred to as double stayed, as it incorporates stay cables both above and below the guideway in a symmetric arrangement. Use of double stay cables allows static guideway alignment to be determined and maintained by cable pretension. A typical guideway section is modeled as a simply supported beam with discrete elastic supports at the cable connections. The supporting pylon is treated as a cantilever beam with concentrated end loads. Fourier analysis and the method of assumed modes are used to solve the coupled equations of motion when the guideway is subjected to a moving constant load. Numerical results show that guideway deflection can be effectively reduced through tension control in the lower stay cables. Modification of lower‐cable tensions in response to external loading has the effect of increasing the load‐carrying ability of the pretension in upper cables.
dc.publisherAmerican Society of Civil Engineers
dc.titleDynamic Analysis of Active‐Control, Cable‐Stayed Guideway
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)0733-9445(1993)119:8(2403)
dc.treeJournal of Structural Engineering:;1993:;Volume ( 119 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record