Show simple item record

dc.contributor.authorZheng
dc.contributor.authorM. S.
dc.contributor.authorHossain
dc.contributor.authorWang
dc.date.accessioned2017-05-08T22:07:26Z
dc.date.available2017-05-08T22:07:26Z
dc.date.copyrightDecember 2015
dc.date.issued2015
dc.identifier.other29892511.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/71800
dc.description.abstractThis paper reports the results from numerical modeling of spudcan deep penetration through three-layer clays. Two typical seabed strength profiles commonly encountered in the field, and identified as critical for potential punch-through failure, were considered: (1) uniform stiff-soft-stiff clay and (2) nonuniform clay with an interbedded stiff clay layer. Three-dimensional large deformation finite-element (LDFE) analyses were carried out with and without simulating strain softening and strain rate dependency of the shear strength. The results were compared with previously published LDFE results and centrifuge test data. A detailed parametric study was undertaken, varying the relevant range of layer thicknesses (relative to the spudcan diameter), strength ratios, normalized strength, and strength nonhomogeneity. Punch-through and rapid leg penetration (for stiff-over-soft) and squeezing (for the reverse) were demonstrated by the penetration resistance profiles and associated soil failure mechanisms. The results emphasized that the resistance profile from a spudcan continuous penetration in a three-layer sediment (e.g., stiff-soft-stiff) may be significantly different from the combined profiles resulting from two separate analyses on first-second layers and second-third layers, even if an appropriate depth factor is accounted for. For uniform stiff-soft-stiff clays, the presence of the bottom stiff clay layer within a short distance of one diameter affected spudcan bearing response in the top layer and suppressed the potential for punch-through failure (apart from rapid leg run for
dc.publisherAmerican Society of Civil Engineers
dc.titleNumerical Modeling of Spudcan Deep Penetration in Three-Layer Clays
dc.typeJournal Paper
dc.journal.volume15
dc.journal.issue6
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000439
dc.treeInternational Journal of Geomechanics:;2015:;Volume ( 015 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record