Show simple item record

dc.contributor.authorTommaso Rotunno
dc.contributor.authorLuisa Rovero
dc.contributor.authorUgo Tonietti
dc.contributor.authorSilvia Briccoli Bati
dc.date.accessioned2017-05-08T22:07:24Z
dc.date.available2017-05-08T22:07:24Z
dc.date.copyrightJune 2015
dc.date.issued2015
dc.identifier.other29805336.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/71784
dc.description.abstractCarbon fiber–reinforced polymer (CFRP) composite materials have been widely used to strengthen masonry constructions. The bond between CFRP and substrate strongly conditions the performance of reinforced masonry structures. Characterization of shear bond mechanical behavior of masonry-CFRP interface thus becomes a crucial factor. The paper presents the results of an extensive experimental investigation aimed at evaluating the bond between clay brick and CFRP sheet. Specimens with varying width and length of the bonded CFRP sheet were subjected to shear test by three different testing setups. Results allowed comparison of the effectiveness of the three types of setup and pointed out the influence of the dimensions of the bonded sheet on ultimate load and ultimate slip, load-displacement diagram, and failure modes. Measurement of local strain along the CFRP sheet also allowed an investigation on the transfer mode of the stresses from the reinforcement to the brick and the determination of the local shear stress-slip relationship.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Study of Bond Behavior of CFRP-to-Brick Joints
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000528
dc.treeJournal of Composites for Construction:;2015:;Volume ( 019 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record