Show simple item record

dc.contributor.authorMax Stephens
dc.contributor.authorPeter Dusicka
dc.date.accessioned2017-05-08T22:06:15Z
dc.date.available2017-05-08T22:06:15Z
dc.date.copyrightJuly 2014
dc.date.issued2014
dc.identifier.other28164539.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/71412
dc.description.abstractExperiments were carried out on shear links with webs made from two metal sheets vulcanized to an elastomeric core to investigate the concept of utilizing continuous web stiffening as means of enhancing the hysteretic behavior. The links were designed for the same nominal strengths and were subjected to increasing cyclic deformations. Two different link aspect ratios were considered with two different core thicknesses. The composite web increased the maximum strength and postbuckling capacity of deep shear links dominated by elastic buckling, but the links were not able to achieve the link plastic shear capacity. Although the use of the elastomer core increased the out-of-plane stiffness of the web, the failure mode was still characterized by web tearing caused by localized regions of reversing out-of-plane buckling zones. Performance expectations were exceeded by an unstiffened base link that achieved the American Institute of Steel Construction (AISC) deformation requirement with minimal strength degradation. Results from the experimental analysis were used to develop and validate a numerical model.
dc.publisherAmerican Society of Civil Engineers
dc.titleContinuously Stiffened Composite Web Shear Links: Tests and Numerical Model Validation
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000996
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record