Show simple item record

dc.contributor.authorAlireza
dc.contributor.authorAgharazi
dc.contributor.authorC. Derek
dc.contributor.authorMartin
dc.contributor.authorDwayne D.
dc.contributor.authorTannant
dc.date.accessioned2017-05-08T22:05:47Z
dc.date.available2017-05-08T22:05:47Z
dc.date.copyrightFebruary 2015
dc.date.issued2015
dc.identifier.other23479042.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/71225
dc.description.abstractThe plate-load test (PLT) is widely performed at large dam sites to determine the rock mass deformability. Analytical relations based on the theory of elasticity, as suggested by the International Society for Rock Mechanics and the American Society for Testing and Materials test standards, are commonly used to interpret the test results and calculate the rock mass deformation modulus. However, because of inconsistency of the test gallery geometry with the half-space medium assumption embedded in the analytical relations, a systematic error occurs in the calculation of the deformation modulus. Furthermore, when the tests are conducted on jointed rock masses, the test results show a considerable scatter, mainly due to the anisotropy of the deformability of jointed rock masses. In this paper, numerical modeling is used to interpret the results of a series of PLTs conducted at the Bakhtiary dam site in southwest Iran. An equivalent continuum model, called
dc.publisherAmerican Society of Civil Engineers
dc.titleNumerical Analysis of Plate-Load Test Results on Fractured Rocks Using an Equivalent-Continuum Model: Case Study of the Bakhtiary Dam Site
dc.typeJournal Paper
dc.journal.volume15
dc.journal.issue1
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000415
dc.treeInternational Journal of Geomechanics:;2015:;Volume ( 015 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record