Show simple item record

dc.contributor.authorYan Weiming
dc.contributor.authorLi Yong
dc.contributor.authorChen Yanjiang
dc.contributor.authorSu Liang
dc.date.accessioned2017-05-08T22:04:47Z
dc.date.available2017-05-08T22:04:47Z
dc.date.copyrightSeptember 2012
dc.date.issued2012
dc.identifier.otherjhtrcq%2E0000111.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/70660
dc.description.abstractTo examine the hysteretic behavior of lead extrusion dampers (LEDs) and their application for the seismic control of viaducts, an experimental research on LEDs according to different heights and lengths of the convex of the extrusion axis was conducted. The feasibility of using LED for seismic control of viaducts and LED design methods are also discussed. The study shows that the height and length of the axis convex can affect the yield force of the LEDs and that the yield force can increase with the increase in height and length of the axis convex. Automobile braking force, temperature effect, and expansion joint width must be considered when LEDs are used on viaducts. Three seismic control methods for LED application are shown to be feasible and to exhibit good seismic control effects.
dc.publisherAmerican Society of Civil Engineers
dc.titleApplication of Lead Extrusion Dampers for Seismic Control of Viaducts
dc.typeJournal Paper
dc.journal.volume6
dc.journal.issue3
dc.journal.titleJournal of Highway and Transportation Research and Development (English Edition)
dc.identifier.doi10.1061/JHTRCQ.0000111
dc.treeJournal of Highway and Transportation Research and Development (English Edition):;2012:;Volume ( 006 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record