Show simple item record

dc.contributor.authorLi Ming
dc.contributor.authorChen Yunhai
dc.contributor.authorLü Jianming
dc.date.accessioned2017-05-08T22:04:46Z
dc.date.available2017-05-08T22:04:46Z
dc.date.copyrightMarch 2012
dc.date.issued2012
dc.identifier.otherjhtrcq%2E0000088.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/70635
dc.description.abstractIn order to study the deformation features of box girder with corrugated steel webs, based on the project of Juancheng Yellow River Highway Bridge, two element-modeling methods were adopted to perform the finite element analysis throughout the construction process by Highway Bridge Design Analysis Software (Chinese name abbreviation: GQJS). In the first method (One-node Method for short), elements of top and bottom concrete slabs as well as steel webs share the same nodes, agreeing with the assumption of plane section. And plain steel webs were adopted instead of corrugated steel webs. In order to take into account the accordion effect of corrugated webs, the reduction elastic modulus of Q345 steel was determined according to equivalent axial stiffness. In the second method (Two-node Method for short), nodes of elements of top and bottom concrete slabs were independent relatively and elements of corrugated steel webs connect with elements of top and bottom concrete slab. In this case, relative displacement was allowed between the top and bottom concrete slab element, not agreeing with the assumption of plane section, and the relative displacement between top and bottom concrete slab nodes were controlled by elements of corrugated steel webs. The results show that there is no great difference in terms of deformation value adopting either the One-node Method or the Two-node Method and the numerical results of the two methods are in good agreement with measured results, which indicates that the two modeling methods are feasible.
dc.publisherAmerican Society of Civil Engineers
dc.titleApplication of GQJS in Calculation for Construction Process of Continuous Box Girder Bridge with Corrugated Steel Webs
dc.typeJournal Paper
dc.journal.volume6
dc.journal.issue1
dc.journal.titleJournal of Highway and Transportation Research and Development (English Edition)
dc.identifier.doi10.1061/JHTRCQ.0000088
dc.treeJournal of Highway and Transportation Research and Development (English Edition):;2012:;Volume ( 006 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record