Show simple item record

dc.contributor.authorWang Qi
dc.contributor.authorHan Xi
dc.contributor.authorYi Zhijian
dc.date.accessioned2017-05-08T22:04:45Z
dc.date.available2017-05-08T22:04:45Z
dc.date.copyrightMarch 2012
dc.date.issued2012
dc.identifier.otherjhtrcq%2E0000083.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/70629
dc.description.abstractBased on the existing detection methods of cavity areas under concrete pavement, the transient impulse-response method for cavity detection was put forward. The detailed operation process of cavity detection was described by model test, and the Zero Slope Identification method was put forward through the cubic spline fitting curves of amplitudes at measuring points. The test results also indicates that the real boundary of cavity slab is a fuzzy zone, and the cavities identified by the Zero Slope Identification method are little larger than real ones. Finally, the tests on the real concrete pavements also verified the feasibility of transient impulse-response method in practice, and the method also established the foundation of detailed researches and development of measuring instrument in the future.
dc.publisherAmerican Society of Civil Engineers
dc.titleStudy on Identification of Cavity Area under Concrete Pavement Using Transient Impulse-response Method
dc.typeJournal Paper
dc.journal.volume6
dc.journal.issue1
dc.journal.titleJournal of Highway and Transportation Research and Development (English Edition)
dc.identifier.doi10.1061/JHTRCQ.0000083
dc.treeJournal of Highway and Transportation Research and Development (English Edition):;2012:;Volume ( 006 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record