Show simple item record

dc.contributor.authorYang Weijun
dc.contributor.authorZhang Zhenhao
dc.date.accessioned2017-05-08T22:04:44Z
dc.date.available2017-05-08T22:04:44Z
dc.date.copyrightSeptember 2011
dc.date.issued2011
dc.identifier.otherjhtrcq%2E0000069.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/70613
dc.description.abstractThe redistribution behavior of internal plastic force and the moment modification limited value of tubular hollow continuous slab were studied through experiment and theoretical analysis. First, loading experiment of four large scale two-span continuous slab was performed to measure the length and the rotational capacity of plastic hinge of the tubular hollow continuous slab in the plastic stage. Then, based on the experiment, the moment modification limited value of the tubular hollow continuous slab that meets the requirement of the bearing capacity under a given load was analyzed. It shows from the experiment that the tubular hollow continuous slab can develop full internal force redistribution under the moment modification values of 16.5%–30.7%. And the theoretical calculation shows that the moment modification limited value of tubular hollow slab will be 35.65%. The research shows that the tubular hollow continuous slab has good performance of redistribution of internal plastic force and its moment modification limited value is higher.
dc.publisherAmerican Society of Civil Engineers
dc.titleMoment Modification Limited Value of Tubular Hollow Continuous Slab Considering Bearing Capacity Requirement
dc.typeJournal Paper
dc.journal.volume5
dc.journal.issue2
dc.journal.titleJournal of Highway and Transportation Research and Development (English Edition)
dc.identifier.doi10.1061/JHTRCQ.0000069
dc.treeJournal of Highway and Transportation Research and Development (English Edition):;2011:;Volume ( 005 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record