Show simple item record

dc.contributor.authorY. Ozeren
dc.contributor.authorD. G. Wren
dc.contributor.authorM. Altinakar
dc.contributor.authorP. A. Work
dc.date.accessioned2017-05-08T22:04:06Z
dc.date.available2017-05-08T22:04:06Z
dc.date.copyrightNovember 2011
dc.date.issued2011
dc.identifier.other%28asce%29ww%2E1943-5460%2E0000137.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/70368
dc.description.abstractFloating breakwaters are typically used to protect small marinas or for shoreline erosion control on limited-fetch water bodies in which wavelengths are relatively short, such as lakes, reservoirs, and bays. In spite of the large amount of literature on floating breakwaters, there is still a lack of knowledge on the performance of cylindrical breakwaters, which, as a result of their simplicity, can minimize construction and material costs. In this paper, we describe a laboratory investigation of the hydrodynamic interaction of cylindrical breakwaters with monochromatic waves in deep and transitional water depths such as are found in small reservoirs. The tested breakwater models feature single- and multiple-cylinder cross sections combined with bottom-moored, arm-restrained (connected to shoreline), and pile-restrained configurations. When the breakwater models were fixed, the reflection was higher than in the partially restrained models, and the efficiency was strongly dependent on draft ratio (
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Investigation of Cylindrical Floating Breakwater Performance with Various Mooring Configurations
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue6
dc.journal.titleJournal of Waterway, Port, Coastal, and Ocean Engineering
dc.identifier.doi10.1061/(ASCE)WW.1943-5460.0000090
dc.treeJournal of Waterway, Port, Coastal, and Ocean Engineering:;2011:;Volume ( 137 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record