Show simple item record

dc.contributor.authorCheng Yu
dc.date.accessioned2017-05-08T22:01:11Z
dc.date.available2017-05-08T22:01:11Z
dc.date.copyrightMarch 2010
dc.date.issued2010
dc.identifier.other%28asce%29su%2E1943-5428%2E0000046.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68877
dc.description.abstractA cold-formed steel framed shear wall may fail in shear buckling of the sheathing, local buckling or distortional buckling of the framing member under compression forces or connection failures. An unusual distortional buckling mode on boundary studs under uplift forces was recently observed in a shear wall test program conducted at the University of North Texas. It was found in monotonic pushover shear wall tests that the flanges of the boundary studs undertaking uplift forces were distorted at the bottom area of the studs near the hold-down. This paper presents the test program and analysis of the unique distortional buckling mode. The paper also provides procedures for predicting the distortional buckling strength of the boundary studs, as well as the construction details to mitigate the damage by this unexpected distortional buckling mode.
dc.publisherAmerican Society of Civil Engineers
dc.titleDistortional Buckling of Cold-Formed Steel Shear Wall Studs under Uplift Force
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.129
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record