Show simple item record

dc.contributor.authorD. N. Lacroix
dc.contributor.authorG. Doudak
dc.contributor.authorKhaled El-Domiaty
dc.date.accessioned2017-05-08T22:01:07Z
dc.date.available2017-05-08T22:01:07Z
dc.date.copyrightApril 2014
dc.date.issued2014
dc.identifier.other%28asce%29st%2E1943-541x%2E0000975.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68825
dc.description.abstractThis paper presents the results of an experimental program, where a total of eight retrofitted walls were subjected to blast loading, simulated by shock waves using the University of Ottawa’s shock tube. Four different external retrofit options were considered and their behavior in terms of failure mode, stiffness, and strength were documented. Nonlinear single-degree-of-freedom (SDOF) modeling was performed using material models developed specifically for each retrofit. In general, good agreement was found between the predicted level of damage and calculated displacement using the model and the measured behavior. The study shows that a significant increase in stiffness and strength can be achieved.
dc.publisherAmerican Society of Civil Engineers
dc.titleRetrofit Options for Light-Frame Wood Stud Walls Subjected to Blast Loading
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000885
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record