Show simple item record

dc.contributor.authorD. López-Martín
dc.contributor.authorJ. F. Carbonell-Márquez
dc.contributor.authorL. M. Gil-Martín
dc.contributor.authorE. Hernández-Montes
dc.date.accessioned2017-05-08T22:00:37Z
dc.date.available2017-05-08T22:00:37Z
dc.date.copyrightJanuary 2014
dc.date.issued2014
dc.identifier.other%28asce%29st%2E1943-541x%2E0000836.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68727
dc.description.abstractThe strength design of reinforced concrete (RC) rectangular sections for combined compression and in-plane bending with two levels of reinforcement is indeterminate: three unknowns are to be solved, but with only two equilibrium equations; an additional condition is necessary to solve the problem. The additional condition leads to the finding of a minimum reinforcement-concrete ratio. This paper proposes a new approach based on the equivalent eccentricity of the applied compressive load. Different domains are reported, each of which is associated with given values of eccentricity and axial load. Analytical expressions for the domain boundaries are established, and a simple procedure is described to outline the conditions corresponding to the optimal reinforcement. The main advantage of this procedure is its simplicity, which allows manual computations. Some examples employing reinforcement sizing diagrams illustrate the validity of this approach.
dc.publisherAmerican Society of Civil Engineers
dc.titleEccentricity-Based Optimization Procedure for Strength Design of RC Sections under Compression and In-Plane Bending Moment
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000794
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record