Show simple item record

dc.contributor.authorW. Shen
dc.contributor.authorY. S. Choo
dc.contributor.authorJ. Wardenier
dc.contributor.authorJ. A. Packer
dc.contributor.authorG. J. van der Vegte
dc.date.accessioned2017-05-08T22:00:37Z
dc.date.available2017-05-08T22:00:37Z
dc.date.copyrightJanuary 2014
dc.date.issued2014
dc.identifier.other%28asce%29st%2E1943-541x%2E0000833.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68724
dc.description.abstractExperimental tests and subsequent finite-element (FE) calibration studies were conducted to study the static strength of axially loaded X joints between elliptical hollow sections (EHS) with braces welded to the wide sides of the chord. Good agreement between the experimental and numerical results was achieved. The behavior of the EHS joints was found to be similar to that of rectangular hollow section (RHS) joints. For the EHS X joints with a brace-to-chord diameter ratio (
dc.publisherAmerican Society of Civil Engineers
dc.titleStatic Strength of Axially Loaded Elliptical Hollow Section X Joints with Braces Welded to Wide Sides of Chord. I: Numerical Investigations Based on Experimental Tests
dc.typeJournal Paper
dc.journal.volume140
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000791
dc.treeJournal of Structural Engineering:;2014:;Volume ( 140 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record