Show simple item record

dc.contributor.authorM. Saiid
dc.contributor.authorSaiidi
dc.contributor.authorAshkan
dc.contributor.authorVosooghi
dc.contributor.authorRobert B.
dc.contributor.authorNelson
dc.date.accessioned2017-05-08T22:00:36Z
dc.date.available2017-05-08T22:00:36Z
dc.date.copyrightAugust 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000832.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68723
dc.description.abstractShake-table response of a 33.6-m-long (110-ft-long), four-span, RC bridge model with a continuous posttensioned superstructure supported on three, two-column bents was studied under horizontal bidirectional coherent simulated earthquakes. The pier heights varied, introducing a slight asymmetry about the centerline of the bridge model. The superstructure ends were supported on seat-type abutments that were connected to hydraulic actuators simulating abutment movements. The skew angle was zero. The bridge model was subjected to successive motions simulating a modified version of a record from the 1994 Northridge Earthquake. Results showed that damage was concentrated in plastic hinge regions of the columns and that the pier caps and the superstructure remained essentially elastic. The shortest pier failed, but this pier continued to carry vertical loads, and the bridge did not collapse. Despite the lack of skew, the superstructure-abutment interaction led to large in-plane rotations that caused significant residual displacements in the piers.
dc.publisherAmerican Society of Civil Engineers
dc.titleShake-Table Studies of a Four-Span Reinforced Concrete Bridge
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000790
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record