Show simple item record

dc.contributor.authorBurcu
dc.contributor.authorBurak
dc.contributor.authorHakki Gurhan
dc.contributor.authorComlekoglu
dc.date.accessioned2017-05-08T22:00:34Z
dc.date.available2017-05-08T22:00:34Z
dc.date.copyrightNovember 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000827.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68717
dc.description.abstractAn analytical study is performed to evaluate the effect of shear wall area to floor area ratio on the seismic behavior of midrise RC structures. For this purpose, 24 midrise building models that have five and eight stories and shear wall ratios ranging between 0.51 and 2.17% in both directions are generated. Then, the behavior of these building models under earthquake loading is examined by carrying out nonlinear time history analyses. In the analyses, seven different ground motion records are applied to the building models, and the average of the obtained data is used in the evaluation of the seismic performance. Main parameters considered in this study that affect the overall seismic performance of the buildings are the roof and interstory drifts and the base shear responses. The analytical results indicate that at least 1.0% shear wall ratio should be provided in the design of midrise buildings to control the drift. In addition, when the shear wall ratio increases beyond 1.5%, it is observed that the improvement of the seismic performance is not as significant.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffect of Shear Wall Area to Floor Area Ratio on the Seismic Behavior of Reinforced Concrete Buildings
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000785
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record