Show simple item record

dc.contributor.authorTiziano
dc.contributor.authorPerea
dc.contributor.authorRoberto T.
dc.contributor.authorLeon
dc.contributor.authorJerome F.
dc.contributor.authorHajjar
dc.contributor.authorMark D.
dc.contributor.authorDenavit
dc.date.accessioned2017-05-08T22:00:34Z
dc.date.available2017-05-08T22:00:34Z
dc.date.copyrightJuly 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000826.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68716
dc.description.abstractComposite steel-concrete columns and beam-columns have been shown to provide superior performance when the intrinsic synergistic characteristics of concrete and steel are properly exploited. However, limited test data are available to justify the structural system response factors and comprehensive design equations in current design specifications. This research, through the testing of 18 full-scale, slender concrete-filled steel tube (CFT) beam-columns, addresses these needs by providing comprehensive data to calibrate advanced computational models and assess design equations. The CFT specimens were subjected to complex load protocols that included pure compression, uniaxial and biaxial bending combined with compression, pure torsion, and torsion combined with compression. The results for the pure compression tests reported in this paper indicate that current AISC design provisions provide an accurate estimation of column capacity for both strength and stiffness. The experimental loading response was also contrasted with column curves obtained from advanced, nonlinear fiber analysis models. The experimental and computational column curves are strongly correlated in the elastic critical load range, but showed some differences in the inelastic buckling load range. These differences are attributed to the higher concrete strength assumed in the computational analysis because of the confinement effect of the steel tube; this strength is underpredicted in current design specifications.
dc.publisherAmerican Society of Civil Engineers
dc.titleFull-Scale Tests of Slender Concrete-Filled Tubes: Axial Behavior
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000784
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record