Show simple item record

dc.contributor.authorCenk Demirkir
dc.contributor.authorGursel Colakoglu
dc.contributor.authorErol Karacabeyli
dc.date.accessioned2017-05-08T22:00:32Z
dc.date.available2017-05-08T22:00:32Z
dc.date.copyrightDecember 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000820.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68710
dc.description.abstractShear walls provide the lateral resistance needed for light-frame wood structures to withstand earthquake and wind loads. When sheathed with wooden structural panels, shear walls can be strong, stiff, and ductile. This is a study on the effect of wood species and drying temperature of veneer on the suitability of plywood for use in shear walls resisting earthquake loads. The highest lateral nail strength values were obtained from plywood panels manufactured from black pine veneers dried at 160°C. Group C (black pine) showed the highest maximum load values and the greatest displacement at ultimate load, whereas Group A (Scots pine) showed the lowest maximum load values and the least displacement at ultimate load. The stiffness values (2.38, 2.52, and 2.28 for Groups C1, C2, and C3, respectively) in Group C were higher than those of the other groups. The results exceeded the values for standards described in
dc.publisherAmerican Society of Civil Engineers
dc.titleEffect of Manufacturing Factors on Technological Properties of Plywood from Northern Turkey and Suitability of Panels for Use in Shear Walls
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000777
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record