Show simple item record

dc.contributor.authorİlker
dc.contributor.authorKazaz
dc.date.accessioned2017-05-08T22:00:30Z
dc.date.available2017-05-08T22:00:30Z
dc.date.copyrightNovember 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000812.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68702
dc.description.abstractThis study was organized to derive an analytical expression for the estimation of plastic hinge length for cantilever structural walls using the results of comprehensive nonlinear finite-element analyses. For that purpose, a parametric study was conducted. The variation of plastic zone length at the base of the cantilever shear wall models was determined on the basis of analysis results that depend on several parameters, such as the wall length, wall height, axial load ratio, and the ratio of wall boundary element and the web horizontal reinforcement. In light of the parametric investigation, a plastic hinge length expression was proposed dependent on wall length, axial load ratio, wall horizontal web reinforcement ratio, and shear-span-to-wall-length ratio. Existing plastic hinge length prediction formulations were also compared with the plastic hinge length obtained from finite-element analyses. Finally, the accuracy and reliability of the proposed plastic hinge length equation was verified by using the available shear wall test results.
dc.publisherAmerican Society of Civil Engineers
dc.titleAnalytical Study on Plastic Hinge Length of Structural Walls
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000770
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record