Show simple item record

dc.contributor.authorMichael H.
dc.contributor.authorScott
dc.date.accessioned2017-05-08T22:00:27Z
dc.date.available2017-05-08T22:00:27Z
dc.date.copyrightNovember 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000800.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68690
dc.description.abstractTo expand the scope of accurate and efficient gradient-based applications in structural engineering, the direct differentiation method (DDM) is applied to compute the response sensitivity of force-based frame finite elements with combined material and geometric nonlinearity where the transverse displacement field is determined by curvature-based displacement interpolation. Sensitivity is developed for element-level parameters including constitutive properties, cross-section dimensions, and integration points and weights, as well as structural-level parameters corresponding to nodal coordinates. The response sensitivity is found to be significantly more complicated than for geometrically linear force-based elements because it requires the derivative of the transverse displacement field under the condition of fixed basic forces. Finite-difference calculations verify the DDM sensitivity equations for material and geometric nonlinear force-based element response while reliability analysis of a gravity-loaded steel frame demonstrates the efficiency of the DDM sensitivity in a gradient-based application.
dc.publisherAmerican Society of Civil Engineers
dc.titleResponse Sensitivity of Geometrically Nonlinear Force-Based Frame Elements
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000757
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record