Show simple item record

dc.contributor.authorWei-Yong
dc.contributor.authorWang
dc.contributor.authorGuo-Qiang
dc.contributor.authorLi
dc.contributor.authorVenkatesh
dc.contributor.authorKodur
dc.date.accessioned2017-05-08T22:00:10Z
dc.date.available2017-05-08T22:00:10Z
dc.date.copyrightApril 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000730.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68616
dc.description.abstractThis paper presents an approach for modeling the fire insulation damage in steel columns. Both experimental and numerical studies were carried out to investigate the failure pattern and damage phenomenon of fire insulation on steel columns under monotonic and cyclic loads at ambient conditions. As part of the experiments, three fire-insulated steel columns were tested, and the horizontal load and displacement at the top of the column were monitored. The test results show that the adhesion of fire insulation with steel columns is generally weak and that the fire insulation peels off from the column surface under large moments induced at the ends of the column. Under cyclic loading, the adhesion of fire insulation weakens significantly because of the damage-accumulation effect. A finite-element model was developed to evaluate interlaminar stress between the steel plate and the fire insulation, and the effect of critical factors on insulation damage was studied. Results from experimental and numerical studies are utilized to develop an approach for modeling the fire insulation damage in steel columns. In this approach, two damage criteria, namely, maximum stress and distortion energy, are considered for evaluating the insulation damage and damage length. Results from case studies indicate that either of the damage criteria can be applied for evaluating insulation damage and also that both of the criteria predict similar damage patterns.
dc.publisherAmerican Society of Civil Engineers
dc.titleApproach for Modeling Fire Insulation Damage in Steel Columns
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000688
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record