Show simple item record

dc.contributor.authorJason C.
dc.contributor.authorStith
dc.contributor.authorTodd A.
dc.contributor.authorHelwig
dc.contributor.authorEric B.
dc.contributor.authorWilliamson
dc.contributor.authorKarl H.
dc.contributor.authorFrank
dc.contributor.authorMichael D.
dc.contributor.authorEngelhardt
dc.contributor.authorAndrew C.
dc.contributor.authorSchuh
dc.contributor.authorJamie F.
dc.contributor.authorFarris
dc.contributor.authorBrian J.
dc.contributor.authorPetruzzi
dc.date.accessioned2017-05-08T22:00:09Z
dc.date.available2017-05-08T22:00:09Z
dc.date.copyrightApril 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000715.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68601
dc.description.abstractSeveral stages of performance need to be considered during the design of curved I-girders, including both the construction stage and the in-service conditions. Girder stability during the early stages of construction can be difficult to assess because the girders, at times, have little or no bracing present. One stage when there is no bracing present occurs when the girders are picked up from the ground or transport trucks by cranes and lifted into place. To better understand girder response during this critical stage, field studies were conducted on horizontally curved I-girders to measure rotations and stresses during the lifting process. This paper provides details of a semianalytical solution to predict the buckling and deformational responses of straight and curved girder segments during lifting. The deformations can be compared with rotational limits that were established to minimize problems with making connections to previously erected girder segments. The total rotational deformations of a horizontally curved girder result from two distinct components: (1) rigid-body rotation and (2) rotation caused by the girder cross-sectional twist owing to torsion from the girder’s self-weight. A spreadsheet design tool,
dc.publisherAmerican Society of Civil Engineers
dc.titleBehavior of Horizontally Curved I-Girders during Lifting
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000674
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record