Show simple item record

dc.contributor.authorChristopher D.
dc.contributor.authorEamon
dc.contributor.authorElin
dc.contributor.authorJensen
dc.date.accessioned2017-05-08T21:59:57Z
dc.date.available2017-05-08T21:59:57Z
dc.date.copyrightFebruary 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000655.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68536
dc.description.abstractA procedure for conducting reliability analysis of RC beams subjected to a fire load is presented. This involves identifying relevant load combinations, specifying critical load and resistance random variables, and establishing a high-temperature performance model for beam capacity. Based on the procedure, an initial reliability analysis is conducted using currently available data. Significant load random variables are taken to be dead load, sustained live load, and fire temperature. Resistance is in terms of moment capacity, with random variables taken as steel yield strength, concrete compressive strength, placement of reinforcement, beam width, and thermal diffusivity. A semiempirical model is used to estimate beam moment capacity as a function of fire exposure time, which is calibrated to experimental data available in the literature. The effect of various beam parameters was considered, including cover, beam width, aggregate type, compressive strength, dead to live load ratio, reinforcement ratio, support conditions, mean fire temperature, and other parameters. Using the suggested procedure, reliability was estimated from zero to 4 h of fire exposure using Monte Carlo simulation. It was found that reliability decreased nonlinearly as a function of time, whereas the most significant parameters were concrete cover; span/depth ratio when axial restraints are present, mean fire temperature, and support conditions.
dc.publisherAmerican Society of Civil Engineers
dc.titleReliability Analysis of RC Beams Exposed to Fire
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000614
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record