Show simple item record

dc.contributor.authorSangjoon
dc.contributor.authorPark
dc.contributor.authorKhalid M.
dc.contributor.authorMosalam
dc.date.accessioned2017-05-08T21:59:54Z
dc.date.available2017-05-08T21:59:54Z
dc.date.copyrightJanuary 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000631.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68511
dc.description.abstractThe paper presents the experimental investigation of full-scale RC corner beam-column joints without transverse reinforcement in the joint region leading to nonductile behavior in many exiting RC buildings. The experimental study considered two design parameters: joint aspect ratio and beam longitudinal reinforcement ratio. Four corner beam-column joint specimens were constructed with transverse beams and floor slabs and tested under quasi-static cyclic loading. The specimens experienced joint shear failure without beam hinging mechanism as a result of the absence of transverse reinforcement in the joint region. On the basis of the test results, the paper discusses the effects of these two design parameters and the floor slab on the behavior of corner beam-column joints. The joint shear strengths obtained from the test specimens are compared with the strength recommendations of the ASCE/SEI 41-06 provisions.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Investigation of Nonductile RC Corner Beam-Column Joints with Floor Slabs
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000591
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record