Show simple item record

dc.contributor.authorBabak
dc.contributor.authorMoaveni
dc.contributor.authorAndreas
dc.contributor.authorStavridis
dc.contributor.authorGeert
dc.contributor.authorLombaert
dc.contributor.authorJoel P.
dc.contributor.authorConte
dc.contributor.authorP. Benson
dc.contributor.authorShing
dc.date.accessioned2017-05-08T21:59:53Z
dc.date.available2017-05-08T21:59:53Z
dc.date.copyrightOctober 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000626.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68504
dc.description.abstractThis paper presents a study on the identification of progressive damage, using an equivalent linear finite-element model updating strategy, in a masonry infilled RC frame that was tested on a shake table. A two-thirds-scale, 3-story, 2-bay, infilled RC frame was tested on the UCSD–NEES shake table to investigate the seismic performance of this type of construction. The shake table tests induced damage in the structure progressively through scaled historical earthquake records of increasing intensity. Between the earthquake tests and at various levels of damage, low-amplitude white-noise base excitations were applied to the infilled RC frame. In this study, the effective modal parameters of the damaged structure have been identified from the white-noise test data with the assumption that it responded in a quasi-linear manner. Modal identification has been performed using a deterministic-stochastic subspace identification method based on the measured input–output data. A sensitivity-based finite-element model updating strategy has been employed to detect, locate, and quantify damage (as a loss of effective local stiffness) based on the changes in the identified effective modal parameters. The results indicate that the method can reliably identify the location and severity of damage observed in the tests.
dc.publisherAmerican Society of Civil Engineers
dc.titleFinite-Element Model Updating for Assessment of Progressive Damage in a 3-Story Infilled RC Frame
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue10
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000586
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record