Show simple item record

dc.contributor.authorGang-Won
dc.contributor.authorJang
dc.contributor.authorMyung-Jin
dc.contributor.authorKim
dc.contributor.authorYoon Young
dc.contributor.authorKim
dc.date.accessioned2017-05-08T21:59:53Z
dc.date.available2017-05-08T21:59:53Z
dc.date.copyrightDecember 2012
dc.date.issued2012
dc.identifier.other%28asce%29st%2E1943-541x%2E0000622.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68500
dc.description.abstractThis investigation presents one-dimensional static and eigenvalue analyses of thin-walled straight beams with generally shaped closed single-cell or multicell sections. For accurate beam analysis, sectional warping and distortional deformations should be considered in addition to the standard Timoshenko displacement field, but it is difficult to obtain the deformation functions analytically for arbitrarily shaped sections. Thus, a numerical method is proposed to obtain sectional deformations for any arbitrarily shaped sections. Once the deformations are identified, they can be integrated over a cross section to yield one-dimensional higher order beam equations. For the numerical determination, the cross section of a thin-walled beam is modeled as a beam frame, where the warping and distortional deformation functions of the section are identified as the eigenmodes of the frame model; the lowest few energy mode sets of in-planar and out-of-planar modes are selected as the distortional and warping deformation functions, respectively. The validity of this approach is checked by comparing the present results with shell finite-element results. For numerical tests, several thin-walled closed sections, including those with flanges or varying wall thicknesses, are considered. The effect of the number of selected warping and distortion sets on solution convergence is also investigated.
dc.publisherAmerican Society of Civil Engineers
dc.titleAnalysis of Thin-Walled Straight Beams with Generally Shaped Closed Sections Using Numerically Determined Sectional Deformation Functions
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000582
dc.treeJournal of Structural Engineering:;2012:;Volume ( 138 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record