Show simple item record

dc.contributor.authorBennett R.
dc.contributor.authorBanting
dc.contributor.authorWael W.
dc.contributor.authorEl-Dakhakhni
dc.date.accessioned2017-05-08T21:59:52Z
dc.date.available2017-05-08T21:59:52Z
dc.date.copyrightDecember 2012
dc.date.issued2012
dc.identifier.other%28asce%29st%2E1943-541x%2E0000612.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68489
dc.description.abstractThere is a need to evaluate existing, and introduce new, masonry construction techniques within a performance-based seismic design context to advance their adoption in the next generation of seismic design codes in North America. In this regard, a reinforced masonry (RM) structural wall system that incorporates confining boundary elements in the plastic hinge region presently lacks specific design requirements in the Masonry Standards Joint Committee and Canadian Standards Association S304.1 design codes. In addition, RM structural wall systems are omitted completely from the plan to develop a new performance-based seismic design methodology laid out by FEMA 445. This paper presents experimental results of four specially detailed RM structural walls subjected to fully reversed cycles of displacement-controlled loading as tested by the authors. In addition, the resulting analysis also includes one wall from a previous study for comparison purposes. All walls were detailed with lateral reinforcing ties confining a grouted core and four vertical reinforcement bars located at each of the wall ends. The design and detailing of the walls represented a range of parameters that would be anticipated to vary within low-to-medium-rise RM buildings. Each of the half-scale walls had overall dimensions of
dc.publisherAmerican Society of Civil Engineers
dc.titleForce- and Displacement-Based Seismic Performance Parameters for Reinforced Masonry Structural Walls with Boundary Elements
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000572
dc.treeJournal of Structural Engineering:;2012:;Volume ( 138 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record