Show simple item record

dc.contributor.authorCheng
dc.contributor.authorYu
dc.contributor.authorKe
dc.contributor.authorXu
dc.date.accessioned2017-05-08T21:59:49Z
dc.date.available2017-05-08T21:59:49Z
dc.date.copyrightMay 2013
dc.date.issued2013
dc.identifier.other%28asce%29st%2E1943-541x%2E0000601.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68477
dc.description.abstractThe North American specifications for the design of cold-formed steel (CFS) structural members provides equations for determining the sheet shear strength in bolted connections when standard holes are used. In applications of oversized holes, the specification requires experimental analysis to be conducted to ensure satisfactory performance. A research project was recently completed at the University of North Texas to investigate the behavior and performance of CFS bolted connections using oversized holes. This paper presents the findings on the sheet shear strength for oversized hole applications. The studied parameters in this research included the following: sheet thickness from 0.762 to 2.997 mm; connection type of single shear and double shear with a single bolt; and bolt diameters of 6.4, 9.5, 12.7, and 15.9 mm. The experimental results indicate that the use of oversized holes without a washer did not significantly weaken the sheet shear strength. Recommendations are provided for predicting the nominal sheet shear strength.
dc.publisherAmerican Society of Civil Engineers
dc.titleShear Strength of a Cold-Formed Steel Sheet in Bolted Connections Using Oversized Holes
dc.typeJournal Paper
dc.journal.volume139
dc.journal.issue5
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000561
dc.treeJournal of Structural Engineering:;2013:;Volume ( 139 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record