Show simple item record

dc.contributor.authorXiaobin
dc.contributor.authorSong
dc.contributor.authorFrank
dc.contributor.authorLam
dc.date.accessioned2017-05-08T21:59:43Z
dc.date.available2017-05-08T21:59:43Z
dc.date.copyrightSeptember 2012
dc.date.issued2012
dc.identifier.other%28asce%29st%2E1943-541x%2E0000543.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68413
dc.description.abstractThis paper presents a study on the critical buckling load and lateral bracing force of metal-plate-connected (MPC) wood truss assemblies. A three-dimensional finite-element method (FEM) based computer program was developed, calibrated, and verified with test results. A preliminary reliability analysis was conducted based on the verified FEM model, with consideration of the variation in material properties and the initial out-of-plane deflection of compression webs. The out-of-plane rotational stiffness of MPC connections has a significant effect on the critical buckling load and lateral bracing force ratio of MPC trusses. The critical buckling load could almost be doubled on the basis of an ideally pinned compression web, and the lateral bracing force ratio was found to be generally less than 1% from the test results and numerical analysis. Consequently, the currently used 2% rule of thumb for lateral bracing design may be conservative, by overestimating the lateral bracing force, and may lead to oversized bracing members.
dc.publisherAmerican Society of Civil Engineers
dc.titleStability Analysis of Metal-Plate-Connected Wood Truss Assemblies
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000502
dc.treeJournal of Structural Engineering:;2012:;Volume ( 138 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record