Show simple item record

dc.contributor.authorR. B. Khadiranaikar
dc.contributor.authorMahesh M. Awati
dc.date.accessioned2017-05-08T21:59:36Z
dc.date.available2017-05-08T21:59:36Z
dc.date.copyrightMarch 2012
dc.date.issued2012
dc.identifier.other%28asce%29st%2E1943-541x%2E0000508.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68374
dc.description.abstractMost of the existing codes are using stress-block parameters which were derived for normal strength concrete. Several researchers in the past have reported that use of ACI 318 stress-block parameters results in un-conservative design of reinforced concrete members for high-performance concrete (HPC). Recent revision of Indian Standard Code IS 456 for design of reinforced members does not include the provisions for strength of concrete beyond 55 MPa. Present research aims at developing the stress-block parameters for wide range of concrete strength between 40–120 MPa. The experimental program includes testing of plain concrete columns, reinforced concrete members such as eccentrically loaded columns, and beams in pure flexure. Moment interaction curves are developed for the column data of the present and previous research. An error analysis is incorporated to prove the consistent conservativeness obtained by the use of the proposed stress-block parameters.
dc.publisherAmerican Society of Civil Engineers
dc.titleConcrete Stress Distribution Factors for High-Performance Concrete
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000465
dc.treeJournal of Structural Engineering:;2012:;Volume ( 138 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record