Show simple item record

dc.contributor.authorSanda
dc.contributor.authorKoboevic
dc.contributor.authorJonathan
dc.contributor.authorRozon
dc.contributor.authorRobert
dc.contributor.authorTremblay
dc.date.accessioned2017-05-08T21:59:32Z
dc.date.available2017-05-08T21:59:32Z
dc.date.copyrightDecember 2012
dc.date.issued2012
dc.identifier.other%28asce%29st%2E1943-541x%2E0000475.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68341
dc.description.abstractThe global seismic response of 3- and 8-story eccentrically braced frames (EBFs), designed for western and eastern North American locations, is studied using nonlinear time history analysis. Analytical models were built in three computer programs. Similar maximum forces were obtained, but the inelastic deformation predictions at the element and global structural levels showed sensitivity to the modeling employed. This feature should be considered in seismic performance assessment or design. Current design methods failed to predict interstory drifts and plastic link rotations, but the study confirmed the strong correlation between the two parameters associated with rigid-plastic behavior. The influence of yielding and flexural buckling of frame members, other than the links on the global frame performance, was evaluated using the
dc.publisherAmerican Society of Civil Engineers
dc.titleSeismic Performance of Low-to-Moderate Height Eccentrically Braced Steel Frames Designed for North American Seismic Conditions
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000433
dc.treeJournal of Structural Engineering:;2012:;Volume ( 138 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record