Show simple item record

dc.contributor.authorJun-Mo Yang
dc.contributor.authorJoo-Ha Lee
dc.contributor.authorYoung-Soo Yoon
dc.contributor.authorWilliam D. Cook
dc.contributor.authorDenis Mitchell
dc.date.accessioned2017-05-08T21:59:32Z
dc.date.available2017-05-08T21:59:32Z
dc.date.copyrightJanuary 2012
dc.date.issued2012
dc.identifier.other%28asce%29st%2E1943-541x%2E0000469.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68335
dc.description.abstractVertical loading tests are reported for six double-sided, high-strength concrete corbel specimens. The primary variables of the investigation were the percentage of steel fibers and the anchorage method of the main tension tie. The test results indicated that performance in terms of load-carrying capacities, stiffness, ductility, and crack width was improved, as the steel fibers were added and the percentage of steel fibers was increased. The corbel specimens with headed bars used as the main tension-tie reinforcement showed superior load-carrying capacities, stiffness, and ductility compared with the corbel specimens in which the main tension ties were anchored by welding to the transverse bars. From the test results, it is expected that the load-carrying capacities, serviceability, and durability of high-strength concrete corbels would be improved by using steel fibers and headed bars. Experimental results presented were also compared with various prediction models.
dc.publisherAmerican Society of Civil Engineers
dc.titleInfluence of Steel Fibers and Headed Bars on the Serviceability of High-Strength Concrete Corbels
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue1
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000427
dc.treeJournal of Structural Engineering:;2012:;Volume ( 138 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record