Show simple item record

dc.contributor.authorZdene ˘k P. Bažant
dc.contributor.authorQiang Yu
dc.contributor.authorGuang-Hua Li
dc.date.accessioned2017-05-08T21:59:27Z
dc.date.available2017-05-08T21:59:27Z
dc.date.copyrightJune 2012
dc.date.issued2012
dc.identifier.other%28asce%29st%2E1943-541x%2E0000416.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68278
dc.description.abstractAs a sequel to Part I, which clarified the causes of the unexpectedly large deflections of the Koror-Babeldaob Bridge in the Pacific island nation of Palau, Part II presents the numerical procedure and reviews the lessons learned. The box girder represents a thick shell that is discretized by eight-node, three-dimensional (3D) finite elements. Except for corrections due to cracking, concrete creep is assumed to follow aging linear viscoelasticity and is modeled by a rate-type law based on the Kelvin chain, the properties of which are adjusted for humidity conditions and temperature. In each time step and at each integration point, Widder’s formula is used to convert the aging compliance function to a continuous retardation spectrum for the current age of concrete, and discretization of the spectrum yields the current elastic moduli of the Kelvin units. The shrinkage strains depend on the environmental humidity and the thickness of each plate in the cross section. The computations proceed according to Bažant’s exponential algorithm, which is unconditionally stable and reduces the problem to a sequence of elasticity problems with an orthotropic effective stiffness of material and nonisotropic inelastic strains, different for each integration point in each time step. These problems are solved by commercial software ABAQUS. The segmental construction sequence is also modeled. The computer results reported in Part I explain the excessive deflections and compare the performance of various material models for creep and shrinkage. Part II formulates the lessons learned and makes recommendations for implementation.
dc.publisherAmerican Society of Civil Engineers
dc.titleExcessive Long-Time Deflections of Prestressed Box Girders. II: Numerical Analysis and Lessons Learned
dc.typeJournal Paper
dc.journal.volume138
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000375
dc.treeJournal of Structural Engineering:;2012:;Volume ( 138 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record