Show simple item record

dc.contributor.authorKeun-Hyeok Yang
dc.contributor.authorAshraf F. Ashour
dc.date.accessioned2017-05-08T21:59:24Z
dc.date.available2017-05-08T21:59:24Z
dc.date.copyrightOctober 2011
dc.date.issued2011
dc.identifier.other%28asce%29st%2E1943-541x%2E0000393.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68252
dc.description.abstractA simplified strut-and-tie model including size effect based on the crack band theory is proposed to evaluate the shear capacity of deep beams. Concrete struts are idealized as uniformly tapered prismatic members with a stress relief strip whereas horizontal and vertical shear reinforcements are assumed to be an internally statically indeterminate system. The shear transfer mechanism of concrete and shear reinforcement is then driven by using the energy equilibrium in the stress relief strip and crack band zone of concrete struts. The shear capacity predictions of deep beams obtained from the present models are in better agreement with 637 test results than those determined from strut-and-tie models proposed by ACI 318-08, EC-2, and Tan and Cheng. In addition, the trend of the shear capacity of deep beams against different parameters as predicted by the present models has a consistent agreement with that observed from experimental results. In particular, the present model shows that the normalized shear capacity of deep beams is proportional to
dc.publisherAmerican Society of Civil Engineers
dc.titleStrut-and-Tie Model Based on Crack Band Theory for Deep Beams
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue10
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000351
dc.treeJournal of Structural Engineering:;2011:;Volume ( 137 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record