Show simple item record

dc.contributor.authorJianguo Nie
dc.contributor.authorYuhang Wang
dc.contributor.authorC. S. Cai
dc.date.accessioned2017-05-08T21:59:23Z
dc.date.available2017-05-08T21:59:23Z
dc.date.copyrightJuly 2011
dc.date.issued2011
dc.identifier.other%28asce%29st%2E1943-541x%2E0000377.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68236
dc.description.abstractBased on fatigue experiments on eight reinforced concrete (RC) beams strengthened with the steel plate-concrete composite (SPCC) technique, the fatigue life and development trend of stiffness and strain of specimens under a constant amplitude fatigue loading were studied. The experimental results showed that the fatigue failure mode of the SPCC strengthened beams was the fatigue failure of the steel plate. The initial fatigue crack in the steel plate appeared near the weld toe of studs and then expanded through the plate. Unlike regular RC beams, the fatigue failure mode of the tested specimens was ductile. The amplitude of stress in the steel plate had the most important influence on the fatigue behavior of RC beams strengthened with the SPCC technique. The level and amplitude of stress in the steel plate should be strictly controlled in practical design, and therefore, the high-strength steel and thin steel plate were not suitable for RC beams strengthened with the SPCC technique. The prestress in the steel plate could improve the fatigue life of RC beams strengthened with the SPCC technique. The
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Research on Fatigue Behavior of RC Beams Strengthened with Steel Plate-Concrete Composite Technique
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000336
dc.treeJournal of Structural Engineering:;2011:;Volume ( 137 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record