Show simple item record

dc.contributor.authorMarios Panagiotou
dc.contributor.authorJosé I. Restrepo
dc.date.accessioned2017-05-08T21:59:23Z
dc.date.available2017-05-08T21:59:23Z
dc.date.copyrightJune 2011
dc.date.issued2011
dc.identifier.other%28asce%29st%2E1943-541x%2E0000374.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68233
dc.description.abstractThis paper describes a displacement-based method of analysis for the performance-based seismic design of regular buildings with reinforced-concrete bearing walls acting as the lateral-force resisting system. The method considers two performance levels: immediate occupancy (IO) and life safety (LS), each anchored at a specific seismic hazard level. It explicitly accounts for the combined effects of inelastic first mode of response, kinematic system overstrength, and higher modes of response. Quantification of these effects is required to capacity-protect the structure and to ensure the intended performance. As an example, the method is applied to a full-scale 7-story reinforced-concrete building slice, built and tested on the George E. Brown Jr. Network for Earthquake Engineering Simulation Large Outdoor High-Performance Shake Table at the University of California–San Diego. The response of the test building largely verified the method discussed in this paper.
dc.publisherAmerican Society of Civil Engineers
dc.titleDisplacement-Based Method of Analysis for Regular Reinforced-Concrete Wall Buildings: Application to a Full-Scale 7-Story Building Slice Tested at UC–San Diego
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000333
dc.treeJournal of Structural Engineering:;2011:;Volume ( 137 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record