Show simple item record

dc.contributor.authorBrian J. Smith
dc.contributor.authorYahya C. Kurama
dc.contributor.authorMichael J. McGinnis
dc.date.accessioned2017-05-08T21:59:22Z
dc.date.available2017-05-08T21:59:22Z
dc.date.copyrightOctober 2011
dc.date.issued2011
dc.identifier.other%28asce%29st%2E1943-541x%2E0000368.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68226
dc.description.abstractThis paper presents the measured behavior from the testing of a 0.4-scale “hybrid” precast concrete wall specimen under reversed-cyclic lateral loading and provides an assessment of the seismic design and analysis of the wall by using the experimental results. The hybrid precast wall system investigated in the paper utilizes a combination of mild (i.e., Grade 400) steel and high-strength unbonded posttensioning (PT) steel for lateral resistance across horizontal joints. A seismic design procedure that conforms to ACI 318 and ACI ITG-5.2 was used for the design of the test specimen based on ACI ITG-5.1. The behavior of the specimen was measured with conventional data acquisition techniques and also full-field digital image correlation of the base panel and the critical joint between the base panel and the foundation, providing unprecedented information on the wall performance. The paper compares these measurements with the design and analytical predictions, focusing specifically on the applied lateral load and displacement, energy dissipation, behavior of the steel reinforcement, and behavior along the horizontal joints. The test specimen was not able to reach the expected ultimate drift level owing to a combination of poor unconfined concrete strength and poor placement of the confinement reinforcement at the toes. However, the performance of the wall up to the failure point was consistent with the predicted behavior based on both the design procedure and the analytical models.
dc.publisherAmerican Society of Civil Engineers
dc.titleDesign and Measured Behavior of a Hybrid Precast Concrete Wall Specimen for Seismic Regions
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue10
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000327
dc.treeJournal of Structural Engineering:;2011:;Volume ( 137 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record