Show simple item record

dc.contributor.authorIn-Rak Choi
dc.contributor.authorHong-Gun Park
dc.date.accessioned2017-05-08T21:59:20Z
dc.date.available2017-05-08T21:59:20Z
dc.date.copyrightJune 2011
dc.date.issued2011
dc.identifier.other%28asce%29st%2E1943-541x%2E0000358.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68215
dc.description.abstractAn experimental study was performed to investigate the cyclic behavior of walls that are composed of reinforced concrete boundary frames and thin steel infill plates. For this purpose, three-story steel plate infilled walls (SPIW) were tested. The parameters in this test were the reinforcement ratio of the columns and opening in the infill plates. A reinforced concrete infilled wall (RCIW) and a reinforced concrete frame (RCF) were also tested for comparison. The deformation capacity of the SPIW specimens was significantly greater than that of the RCIW specimen, though the specimens exhibited an identical load-carrying capacity. Similar to the steel plate walls with steel boundary frames, the SPIW specimens showed excellent strength, deformation capacity, and energy dissipation capacity. Furthermore, by using the steel infill plates, shear cracking and failure of the column-beam joints were prevented. By using the strip model, the strength and initial stiffness of the SPIW specimens were predicted. The prediction results were compared with the test results.
dc.publisherAmerican Society of Civil Engineers
dc.titleCyclic Loading Test for Reinforced Concrete Frame with Thin Steel Infill Plate
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000317
dc.treeJournal of Structural Engineering:;2011:;Volume ( 137 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record