Show simple item record

dc.contributor.authorErol Kalkan
dc.contributor.authorAnil K. Chopra
dc.date.accessioned2017-05-08T21:59:19Z
dc.date.available2017-05-08T21:59:19Z
dc.date.copyrightMarch 2011
dc.date.issued2011
dc.identifier.other%28asce%29st%2E1943-541x%2E0000348.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68206
dc.description.abstractEarthquake engineering is increasingly using nonlinear response history analysis (RHA) to demonstrate the performance of structures. This rigorous method of analysis requires selection and scaling of ground motions appropriate to design hazard levels. This paper presents a modal-pushover-based scaling (MPS) procedure to scale ground motions for use in a nonlinear RHA of buildings. In the MPS method, the ground motions are scaled to match to a specified tolerance, a target value of the inelastic deformation of the first-mode inelastic single-degree-of-freedom (SDF) system whose properties are determined by the first-mode pushover analysis. Appropriate for first-mode dominated structures, this approach is extended for structures with significant contributions of higher modes by considering elastic deformation of second-mode SDF systems in selecting a subset of the scaled ground motions. Based on results presented for three actual buildings—4, 6, and 13-story—the accuracy and efficiency of the MPS procedure are established and its superiority over the ASCE/SEI 7-05 scaling procedure is demonstrated.
dc.publisherAmerican Society of Civil Engineers
dc.titleModal-Pushover-Based Ground-Motion Scaling Procedure
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000308
dc.treeJournal of Structural Engineering:;2011:;Volume ( 137 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record