Show simple item record

dc.contributor.authorLuis Filipe Carvalho Jorge
dc.contributor.authorSergio Manuel Rodrigues Lopes
dc.contributor.authorHelena Maria Pires Cruz
dc.date.accessioned2017-05-08T21:59:18Z
dc.date.available2017-05-08T21:59:18Z
dc.date.copyrightMay 2011
dc.date.issued2011
dc.identifier.other%28asce%29st%2E1943-541x%2E0000339.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68196
dc.description.abstractTimber-concrete composite structures are often used as upgrade solutions for existent timber floors. The timber cross section is maintained and a concrete layer is poured over the floorboard surface. Floorboards help with loading distribution on the beams. The study presented is based on laboratory tests that used specimens made with a lightweight aggregate concrete (LWAC). The use of this type of concrete, compared with normal weight concrete (NWC), has the advantage of lower dead weights, and might be very important in many cases, namely, when the supporting structure has limited strength. Many design works of timber-concrete composite connections do not take into account the timber interlayer, which is known to reduce the load-carrying capacity and the stiffness of the connection. Previous investigations of NWC found that the inclusion of the interlayer leads to average reductions of 30% and 50% for the load capacity and slip modulus, respectively. The current investigation with LWAC found that such reductions are up to 10 and 30%, respectively.
dc.publisherAmerican Society of Civil Engineers
dc.titleInterlayer Influence on Timber-LWAC Composite Structures with Screw Connections
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue5
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000299
dc.treeJournal of Structural Engineering:;2011:;Volume ( 137 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record