Show simple item record

dc.contributor.authorBei Cheng
dc.contributor.authorRay Kai-Leung Su
dc.date.accessioned2017-05-08T21:59:15Z
dc.date.available2017-05-08T21:59:15Z
dc.date.copyrightApril 2011
dc.date.issued2011
dc.identifier.other%28asce%29st%2E1943-541x%2E0000317.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68171
dc.description.abstractThe existing designs for deep reinforced-concrete (RC) coupling beams with low shear-span ratios and conventionally reinforced shear stirrups tend to fail in a brittle way with limited ductility and deformability under reversed cyclic loading. This paper aims to develop a new retrofitting method for existing deep RC coupling beams that can enhance the deformability and energy dissipation while maintaining flexural stiffness, improving the beams’ performance during an earthquake. Experiments were conducted to test four half-scale deep RC coupling beams with the same geometry and reinforcement layout but with different retrofitting schemes. One beam was tested without retrofitting to act as a control, whereas the others were retrofitted by a bolted steel plate with or without adding a buckling restraining device. This study reveals that the deformation and energy dissipation of the deep RC coupling beams retrofitted with restrained steel plates improved while the flexural stiffness did not increase. Moreover, by using laterally restrained steel plates, the specimens had better postpeak behavior, a more ductile failure mode, and better rotation deformability.
dc.publisherAmerican Society of Civil Engineers
dc.titleRetrofit of Deep Concrete Coupling Beams by a Laterally Restrained Side Plate
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000276
dc.treeJournal of Structural Engineering:;2011:;Volume ( 137 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record