Show simple item record

dc.contributor.authorCharles W. Roeder
dc.contributor.authorDawn E. Lehman
dc.contributor.authorErik Bishop
dc.date.accessioned2017-05-08T21:59:12Z
dc.date.available2017-05-08T21:59:12Z
dc.date.copyrightDecember 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000303.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68157
dc.description.abstractConcrete-filled tubes (CFTs) are composite structural members that consist of a steel tube and concrete infill. CFTs optimize the contributions of both components by improving their geometric efficiency and fully using their inherent strengths. The concrete infill is confined by the steel tube, resulting in a triaxial state of compression that increases the strength and strain capacity of the concrete. The perimeter steel is at its optimal location, and the concrete infill delays local and global buckling of the tube. CFTs are easily and rapidly constructed and provide significant compression, bending, and shear resistance. They may be used for bridge piers and building columns. However, current design specifications for CFTs vary significantly, thereby limiting the current understanding and use of these components. This study addresses combined axial and flexural loading and determines the best models for predicting the stiffness and resistance of circular CFT. A database of 122 test specimens was compiled and evaluated. The results indicate that the plastic stress method is a simple yet effective method to predict the resistance of circular CFT components under combined loading. These data show that current specifications provide inaccurate predictions of the flexural stiffness, and a new stiffness expression is proposed. The proposed models permit simple yet accurate predictions of stiffness and resistance and allow engineers to use CFT components routinely in structural design.
dc.publisherAmerican Society of Civil Engineers
dc.titleStrength and Stiffness of Circular Concrete-Filled Tubes
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000263
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record