Show simple item record

dc.contributor.authorT. G. Mara
dc.date.accessioned2017-05-08T21:59:10Z
dc.date.available2017-05-08T21:59:10Z
dc.date.copyrightNovember 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000282.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68135
dc.description.abstractHigh-rise construction projects commonly use a tower crane attached to the building by braced connections along its height. The presence of the tower crane modifies the aerodynamic cross section of the building and can alter the expected wind loading characteristics. Wind tunnel tests were carried out to examine the impact of the solidity ratio, and location of the tower crane, on the wind loading for the overall building-crane system. Tower cranes of two solidity ratios, 20 and 100%, were tested. A tower crane having one of the two solidity ratios tested was placed at one of three locations along the building face in order to define a quantitative range of increased wind loads. Increases in mean and fluctuating loading were observed for particular wind directions, and were more pronounced for the greater solidity ratio. The increase was the most significant for the torsion base moment. The impact of the tower crane was reduced as its location neared the center of the building face. Recommendations are made for the choice of tower crane location.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffects of a Construction Tower Crane on the Wind Loading of a High-Rise Building
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000243
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record