Show simple item record

dc.contributor.authorSwaminathan Krishnan
dc.date.accessioned2017-05-08T21:59:09Z
dc.date.available2017-05-08T21:59:09Z
dc.date.copyrightNovember 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000277.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68129
dc.description.abstractAn efficient beam element, the modified elastofiber (MEF) element, has been developed to capture the overall features of the elastic and inelastic responses of slender columns and braces under axial cyclic loading without unduly heavy discretization. It consists of three fiber segments, two at the member ends and one at midspan, with two elastic segments sandwiched in between. The segments are demarcated by two exterior nodes and four interior nodes. The fiber segments are divided into 20 fibers in the cross section that run the length of the segment. The fibers exhibit nonlinear axial stress-strain behavior akin to that observed in a standard tension test of a rod in the laboratory, with a linear elastic portion, a yield plateau, and a strain-hardening portion consisting of a segment of an ellipse. All the control points on the stress-strain law are user defined. The elastic buckling of a member is tracked by updating both exterior and interior nodal coordinates at each iteration of a time step and checking force equilibrium in the updated configuration. Inelastic postbuckling response is captured by fiber yielding, fracturing, and/or rupturing in the nonlinear segments. The key features of the element include the ability to model each member using a single element, easy incorporation of geometric imperfection, partial fixity support conditions, member susceptibility to fracture defined in a probabilistic manner, and fiber rupture leading to complete severing of the member. The element is calibrated to accurately predict the Euler critical buckling load of box and I sections with a wide range of slenderness ratios (
dc.publisherAmerican Society of Civil Engineers
dc.titleModified Elastofiber Element for Steel Slender Column and Brace Modeling
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000238
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record