Show simple item record

dc.contributor.authorFrancesca da Porto
dc.contributor.authorGiovanni Guidi
dc.contributor.authorEnrico Garbin
dc.contributor.authorClaudio Modena
dc.date.accessioned2017-05-08T21:59:09Z
dc.date.available2017-05-08T21:59:09Z
dc.date.copyrightNovember 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000275.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68127
dc.description.abstractExtensive experimental research aimed at defining the in-plane cyclic behavior of three types of load-bearing masonry walls, assembled with perforated clay units, and various types of head and bed joints was carried out. Experimental behavior was modeled with four types of nonlinear finite-element models. Both macromodeling and micromodeling strategies, implementing either isotropic or orthotropic material laws, were adopted. Two simplified criteria were proposed for calibrating the models, one for defining orthotropic properties starting from perforated unit geometry and the other for defining expanded unit and interface element properties in micromodels. The procedures adopted for model calibration established the reliability of various modeling strategies. Results allow some conclusions to be drawn about the reliability of diagonal compression tests for large unit masonry, the stress distribution and different behaviors of masonry made with different head and bed joints, and the influence of unit strength on the in-plane behavior of masonry.
dc.publisherAmerican Society of Civil Engineers
dc.titleIn-Plane Behavior of Clay Masonry Walls: Experimental Testing and Finite-Element Modeling
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000236
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record