Show simple item record

dc.contributor.authorMark Aschheim
dc.contributor.authorLuisa María Gil-Martín
dc.contributor.authorEnrique Hernández-Montes
dc.date.accessioned2017-05-08T21:59:09Z
dc.date.available2017-05-08T21:59:09Z
dc.date.copyrightDecember 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000274.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68126
dc.description.abstractMany bamboo species are well regarded for their strength and rapid renewability, although the nonuniformity of bamboo poles has impeded use in developed countries. Described herein are the results of a pilot effort to develop engineered bamboo I-joists for use in common low-rise construction applications. Solid section bamboo materials were used to fabricate I-beams; flanges consisted of single-strand bamboo material and webs consisted of bamboo OSB or three-ply material. Experimental results indicate that flexural strengths were limited to 5.2 ksi (36 MPa) by the failure of the flange finger joints; shear strengths were 2.1 ksi (14 MPa) for the bamboo OSB and 3.3 ksi (22 MPa) for the three-ply web material. The modulus of elasticity averaged 2,000 ksi (14 GPa), while the shear modulus was 250 ksi (1.7 GPa) for the bamboo OSB and 140 ksi (0.94 GPa) for the three-ply material. Design values are developed from the test results following a hybrid approach based on ASTM procedures for wood I-joists and whole bamboo poles.
dc.publisherAmerican Society of Civil Engineers
dc.titleEngineered Bamboo I-Joists
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue12
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000235
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record