Show simple item record

dc.contributor.authorE. Minaie
dc.contributor.authorM. Mota
dc.contributor.authorF. L. Moon
dc.contributor.authorA. A. Hamid
dc.date.accessioned2017-05-08T21:59:07Z
dc.date.available2017-05-08T21:59:07Z
dc.date.copyrightSeptember 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000245.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68094
dc.description.abstractThe objectives of this research were to experimentally establish the in-plane behavior of partially grouted (PG) reinforced concrete masonry shear walls and to assess the appropriateness of current seismic design provisions for such walls. To accomplish these, four PG special reinforced masonry shear walls (SRMSWs) were constructed based on the provisions of the Masonry Standards Joint Committee (MSJC) code and subjected to in-plane reversed cyclic displacements. The experimental test variables included mortar formulation, level of axial stress, and boundary conditions. The results of this study indicate that PG masonry shear walls respond similar to in-filled frames and provide little coupling between vertical reinforcing steels. Using these results along with those from past research, it is shown that the shear strength expression for reinforced masonry shear walls provided by MSJC (along with others) appears unconservative for PG masonry shear walls. In terms of displacement ductility, the results indicate that the response of PG SRMSW is consistent with the
dc.publisherAmerican Society of Civil Engineers
dc.titleIn-Plane Behavior of Partially Grouted Reinforced Concrete Masonry Shear Walls
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000206
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record