Show simple item record

dc.contributor.authorYoung Hoon Kim
dc.contributor.authorMary Beth D. Hueste
dc.contributor.authorDavid Trejo
dc.contributor.authorDaren B. H. Cline
dc.date.accessioned2017-05-08T21:59:06Z
dc.date.available2017-05-08T21:59:06Z
dc.date.copyrightAugust 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000233.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68081
dc.description.abstractTo achieve adequate flow and homogeneous concrete for precast, prestressed members, self-consolidating concrete (SCC) typically has higher paste and lower coarse aggregate volumes than conventional concrete (CC). The lower aggregate content of SCC can affect the shear capacity of concrete systems. This research performed 48 push-off tests to investigate the influence of SCC aggregate and paste volumes on the shear capacity and these results were compared with those obtained from similar CC samples. The variables included coarse aggregate type (river gravel and limestone), three coarse aggregate volumes for the SCC mixtures, and two target 16-h release strengths [34 and 48 MPa (5 and 7 ksi)]. The aggregate type, aggregate volume, and concrete strength were found to have significant effects on the aggregate interlock. Test results were used to propose new aggregate interlock models based on the modified compression field theory adopted in the
dc.publisherAmerican Society of Civil Engineers
dc.titleShear Characteristics and Design for High-Strength Self-Consolidating Concrete
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000194
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record