Show simple item record

dc.contributor.authorChen Songlai
dc.contributor.authorFan Chengmou
dc.contributor.authorPan Jinglong
dc.date.accessioned2017-05-08T21:59:04Z
dc.date.available2017-05-08T21:59:04Z
dc.date.copyrightJuly 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000217.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68062
dc.description.abstractThis paper explains an experimental study on a full-scale L-shape single story light frame wood house under the uniform lateral load simulated using a gasbag. The study verifies that shear walls are staggered to each other and the 1.0-m offset between them behave as a continuous shear wall, floor diaphragm with a reentrant corner up to 1.0 m that does not need a continuous end chord. Degradation in racking stiffness of light frame wood construction after continuously repeated cyclic lateral loads is not observable, while intermittent and larger amplitude cycling can cause observable settling of residual deformation and degradation in racking stiffness. The rigidity performance and high racking resistance of the floor diaphragm enables the light frame wood building to remain intact under ultimate lateral load, and recommends interstory percent drift restrictions for the lateral wind load design of the structures and the way to properly calculate racking capacity of gypsum sheathings. The conclusion of this paper can benefit the engineering practice of the light frame wood structures in hazard lateral load regions.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Study on Full-Scale Light Frame Wood House under Lateral Load
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000178
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record