Show simple item record

dc.contributor.authorMichael Winkel
dc.contributor.authorIan Smith
dc.date.accessioned2017-05-08T21:59:04Z
dc.date.available2017-05-08T21:59:04Z
dc.date.copyrightJuly 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000211.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68056
dc.description.abstractThe tests were performed on 2.44 m by 2.44 m light-frame wall segments, having oriented strand-board sheathing nailed to sawn lumber framing, to determine their structural response to in-plane and out-of-plane forces applied separately or in combination. There was no evidence that simultaneous application of in-plane and out-of-plane forces negatively affects the strength of walls. However, it was found that interaction of different in-plane force components can substantially reduce strength capabilities of walls relative to when only one in-plane force component exists. Applying both in-plane tension and racking force in the ratio of 1:1 reduced the capacities of walls by 25 to 40%, with how lumber studs are connected to lumber base plates strongly influencing the absolute capacity of any wall.
dc.publisherAmerican Society of Civil Engineers
dc.titleStructural Behavior of Wood Light-Frame Wall Segments Subjected to In-Plane and Out-of-Plane Forces
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000170
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record